This is the authors' abstract. We don't add key points for this paper.
The most common additive for improving the efficiency and security of refractory castables drying is the incorporation of polymeric fibers. However, the fundamental mechanisms by which they enhance water removal remain unresolved. One of the main hypotheses currently considered in the literature is the formation of microcracks in the matrix surrounding the fibers during heating, due to the coefficient of thermal expansion mismatch between these two phases. The current work investigates the role of the resulting thermomechanical stresses during heating and its potential contribution to microcrack formation in refractory castables comprising polymeric fibers. An analytical thermomechanical model was used to estimate the interfacial tangential stresses induced by thermal expansion differences, using temperature-dependent material properties compiled from the literature for five polymers: linear low density polyethylene (LLDPE); ultrahigh molecular weight polyethylene (UHMWPE); polypropylene (PP); polyamide 6,6 (PA 6,6); and polyethylene terephthalate (PET). The results indicate that the tangential stresses can reach significantly higher levels than the maximum vapor pressure induced during the heating for all polymers considered, with the highest stresses observed for PP and PA 6,6. These values suggest that the thermal expansion mismatch may play a non-negligible role in the permeability evolution during refractory castables drying, regardless of the mechanisms of permeability enhancement. A sensitivity analysis revealed that the tangential stresses are significantly influenced by the polymer’s thermal expansion coefficient and the modulus of elasticity of the fiber, and of the refractory castable, which enables the search for optimal fiber properties for controlling the thermal stress. When compared with experimental results in the literature, these findings support the hypothesis that thermal expansion mismatch may contribute to stress-induced microcracking around polymeric fibers during drying, which could impact the permeability evolution and water removal efficiency.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Moreira et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: