Answers are grounded in this paper and cite their sources.
First, it has been made clear that the important parameters of the SE laser are its active layer thickness d and the mirror reflectivity R . The required values of three parameters such as threshold gain g th , threshold current density J th , and differencial quantum efficiency η d are obtained for d =2∼3 µm and R =95%. At this condition g th is estimated as 300 cm -1 ( N th =3×10 18 cm -3 ), J th is 25∼30 kA/cm 2 , and η d is 40%. Next, in order to obtain a reflectivity as high as 95%, a TiO 2 /SiO 2 multilayer Bragg reflector was introduced. It was found that a good quality TiO 2 film could be evaporated by leaking oxygen through a variable leak valve to hold 1×10 -4 Torr. Then, a 7-pair TiO 2 /SiO 2 multilayer Bragg reflector was fabricated; its peak reflectivity was 95% at 8800 Å. A room-temperature pulsed operation of a GaAlAs/GaAs SE layer was achieved and the minimum threshold current was reduced to as low as 150 mA when a round mesa was fabricated to 20 µm in diam.
No takes yet. Share an insight, caveat, or question.
Kinoshita et al. (1987) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: