Answers are grounded in this paper and cite their sources.
The phase transition, ferroelectric, and piezoelectric properties of a poly(vinylidene fluoride-hexafluoropropylene) [PVDF∕HFP (10 mol %)] copolymer have been investigated. A rapid quenching process led to the formation of the ferroelectric β phase in the PVDF∕HFP (10 mol %). An irreversible crystal phase transition from the β phase to the α and γ phases at a temperature from 120 to 130 °C, which is below its melting point 159 °C, was observed through x-ray diffraction (XRD) experiments. Stretching the melt-quenched material or annealing the material at a temperature below the crystal phase transition temperature resulted in a significant increase in the β phase. Based on the XRD results, the stretched samples had oriented β phase, but the amount of β phase is less than that in the annealed samples; however, our ferroelectric property measurements showed that the stretched samples had a higher polarization than the annealed samples. A theoretical analysis was conducted to clarify the effects of the polymer chain orientation in order to explain our ferroelectric measurement results. Assuming the dipoles are rigid and ignoring the effects of the internal electric field, it was found that the polarization of a randomly oriented PVDF-based polymer is about two-thirds of that of a completely oriented polymer when the volume fractions of β phase are same. According to the analysis, polymer chain orientation significantly affects the ferroelectric polarization due to their determinative role on the distribution of the dipole polarization direction, although there is no polarization along the polymer chain direction.
No takes yet. Share an insight, caveat, or question.
He et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: