Answers are grounded in this paper and cite their sources.
A graphene/Si Schottky junction solar cell is commonly fabricated by using the top-window structure. However, reported devices have many drawbacks such as a small active area of 0.11 cm 2 , s-shape in the J-V curves, recombination process of charge carriers at the graphene/textured Si interface, high cost and a complex fabrication process. Here, we report a novel graphene/Si Schottky junction solar cell with a back contact-structure, which has benefits of a simpler fabrication process, lower fabrication cost, and larger active area in comparison with a device fabricated with the previous structure. Additionally, we found that the PMMA residue left on graphene surfaces is the key to eliminate the s-shape in the J-V curves. Thus, the deep UV treatment of the CVD graphene is applied within the wet transfer process to effectively remove the PMMA residue, suppress the behavior of s-shaped kink in J-V curves and enhance the solar cell efficiency. As a result, the recorded power conversion efficiency of 10% is achieved for graphene/textured Si devices without chemical doping and anti-reflection coating, and this value is improved to 14.1% after applying chemical doping. Doped devices also show great stability and retain 84% of the efficiency after 9 days storage in air.
No takes yet. Share an insight, caveat, or question.
Suhail et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: