This is the authors' abstract. We don't add key points for this paper.
An experimental technique is described for investigating the electrical breakdown process which determines the pumping of an axial-field self-terminating gas laser. The method is applied to the transition C 3 Π u ( v = 0) → B 3 Π g ( v = 0) in nitrogen (0.3371 μm). The pumping from the ground level to these two laser levels is computed from electrical measurements. Use is made of the following published data: (1) mean electron energy and (2) electron drift speed as functions of the ratio of electric field to pressure and (3) cross-sections for electron impact excitation to the laser levels. An additional estimate of the pumping to the upper laser level is obtained from spontaneous emission detected from the side of the discharge tube. The electric discharge extends throughout the gas column by the propagation of an ionizing wave and subsequently grows in intensity by a system of travelling waves which arise by reflection at the ends of the laser tube. The successive waves diminish in magnitude due to partial reflection at the pulse generator and due to the attenuation associated with the conducting gas column. At any point the pumping builds up by contributions from these waves and consequently the pumping varies with both position and time.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Andersson et al. (1974) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: