Answers are grounded in this paper and cite their sources.
The bandwidths of two types of limiters operating below diode resonance and one type of limiter operating at diode resonance are calculated. A 2.5-Gc base-band limiter was made providing a low power insertion loss of less than 1 db, a limiting threshold of 10 mw, and a high power isolation of greater than 20 db. A 0.9-to 1.3-Gc matched limiter was made having a VSWR of less than 1.2 for all power levels. The burnout power of these two limiters was calculated to be about 10 watts incident CW power or 1500 watt-microsecond incident pulse energy. Using the diode resonance the calculations indicate that it is possible to make a 5-Gc limiter with 15 per cent bandwidth, less than 1-db low power insertion loss, a limiting level of 10 mw, and greater than 20-db isolation at high power. The bandwidths derived for diode limiting are equally applicable to switching.
No takes yet. Share an insight, caveat, or question.
Garver et al. (1962) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: