Answers are grounded in this paper and cite their sources.
A new technique for directly measuring the safety factor, or q, profile in a tokamak is described. A tightly collimated neutral beam capable of injecting approximately 100 mA of 30 keV deuterium atoms was mounted on the Adiabatic Toroidal Compressor tokamak. By proper tangential aiming of the beam a strong concentration of circulating fast ions was created at a chosen plasma minor radius. Through examination of the orbits of these ions with a multi-sight-line charge exchange detector, it was possible to measure the shifts of the orbits off magnetic surfaces, and thereby make local measurements of q. This experiement showed that when q on axis reached unity, strong internal turbulence began, and further lowering of q at the outer edge of the plasma did not lower q (0). A second result was that the measured q (0) was approximately 1.8 times larger than the q (0) deduced from the Te(r) profile, assuming Zeff to be independent of minor radius. This suggests a significant peaking of Zeff on axis.
No takes yet. Share an insight, caveat, or question.
R.J. Goldston (1978) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: