Answers are grounded in this paper and cite their sources.
This study investigated the process of partially oxidizing ethane (C2H6) in parallel-plate dielectric barrier discharge (DBD) to generate ethylene oxide (EO) in one step. The effects of the C2H6 feed position, overall feed flow rate, and Ag catalysts with Ni and Cu on the performance and stability of EO production were investigated in DBD operating at ambient temperature and atmospheric pressure. A separate stream of C2H6 was fed into DBD at the optimum feed position (0.5), with the optimum overall feed flow rate (75 cm3/min), increasing EO selectivity and yield. The increased C2H6 feed position and overall feed flow rate decreased the C2H6 molecule residence time for electron activation and undesired reactions, decreasing the byproduct selectivities. The 0.1 wt% Ag catalyst with Ni and Cu had less sintering of the Ag particles, better dispersion of the Ag particles, and more specific surface area, significantly increasing the conversions of C2H6 and O2, selectivity and yield of EO, and stability of the catalysts. This is the first time that a catalyst containing 0.1 wt% Cu and 0.1 wt% Ag has been found to have superior performance and stability in EO production from C2H6 due to their high electrical conductivity and ability of Cu to prevent coke formation, suppress metal agglomeration, and increase metal dispersion over time.
No takes yet. Share an insight, caveat, or question.
Suttikul et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: