Answers are grounded in this paper and cite their sources.
The fatigue strength of brazed joints is strongly influenced by material structure, geometrical shape, and loading mode. In this study, we performed tests and numerical stress analysis on the fatigue strength and fracture behavior of T-shaped Ni alloy brazed joints of thin ferritic stainless steels with different plate thicknesses and the relationship with metallographic structure and stress concentration. It was revealed that the Ni-Cr-Si-P brazing filler metal has excellent gap-filling properties, promotes bonding by interfacial melting reaction with ferritic stainless steel, and forms a smooth fillet at the joint, where the ratio of the fillet curvature radius to the plate thickness affects the stress concentration factor and fatigue limit. The surface of the brazing alloy layer was enriched in P and Cr, and a Ni-Cr-Fe-Si-P solidification structure with lamellar eutectic was formed, where both intergranular and transgranular cracks near the crack initiation site were observed. The slope constant of the S – N curve of the brazed joint was smaller than that of the smooth material plate. When comparing peak stress amplitudes, the fatigue limit values of the brazed joints were the same regardless of the plate thickness based on the probabilistic analysis. A novel model was proposed to predict the fatigue limit of brazed joints by taking into account the impact of both the metallographic structure and the geometry of the fracture initiation point.
No takes yet. Share an insight, caveat, or question.
Oh et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: