Answers are grounded in this paper and cite their sources.
High Resolution Image Download MS PowerPoint Slide Recycling of polymer composites by melt-extrusion has been limited to reinforced thermoplastics. Here, we demonstrate several melt-extrusion recycling cycles for glass fiber-reinforced elastomers cross-linked with a reversible cross-linker ( SS ). In comparison, reinforced elastomers lacking reversible cross-linking ( CC ) exhibited clogging during successive melt-extrusion recycling. Furthermore, commercially available starting materials, such as maleated polypropylene ( PPgMA ), maleated ethylene propylene rubber ( EPRgMA ), and short-cut glass fibers, were utilized. We showed that when tetrasulfide functionalized glass fibers ( SGF ) were embedded in SS cross-linked composites ( CompSS-SGF ), disulfide exchange reactions were further activated. This was manifested in the high tensile strength of 10 MPa and 220% elongation, which were remarkably higher than the 6 MPa and 17% elongation of CC cross-linked composites ( CompCC-SGF) . Moreover, the higher interactions of CompSS-SGF contributed to at least a 25% increase in tensile strength and storage modulus and a 36% increase in creep resistance compared to composite counterparts prepared with as-received glass fibers ( CompSS-AGF ) or clean glass fibers ( CompSS-CGF ). Additionally, the disulfide exchanges in CompSS-SGF possibly contributed to a ≈10% higher tensile strength after recycling. This simple up-scalable approach opens new avenues for the development of fiber-reinforced cross-linked elastomers with facile processability, higher dimensional stability, and up-scalable recycling processes.
No takes yet. Share an insight, caveat, or question.
Garfias et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: