Answers are grounded in this paper and cite their sources.
This study presents a micromechanical model for a single fiber bridging an opening crack in a fiber-reinforced composite with a quasi-brittle matrix. The formulation is based on a representative volume element consisting of a one-sided embedded fiber subjected to uniaxial tension, and distinguishes between the bonding, debonding and sliding phases of the pull-out process. An energy-based approach is employed to determine the evolution of the interfacial debonding crack, enabling the derivation of the fiber bridging stress as a function of the relative displacement between the fiber and matrix, while explicitly accounting for matrix cohesive stresses through a traction–separation law. Matrix crack initiation is predicted using a stress-based failure criterion. The sliding phase is described using a constitutive formulation in which the response emerges from the interplay between interfacial slip-hardening/slip-softening and geometric softening associated with the progressive reduction of the embedded fiber length during pull-out. In addition, fiber rupture is incorporated as a limiting failure mechanism. The model is extended to a two-sided bridging configuration by decomposing the problem into two one-sided segments, with potentially unequal embedment lengths, and enforcing equilibrium and compatibility conditions. The effects of fiber inclination, including snubbing and strength reduction, are incorporated using established empirical relations. The model’s debonding and sliding behavior is calibrated employing experimental fiber pull-out data from the literature, showing its ability to adequately replicate the observed pull-out response. Parametric studies are conducted to investigate the influence of matrix cohesion, fiber and interface properties, embedment asymmetry, and fiber orientation on the crack bridging response. The results show that incorporating matrix cohesion yields a more realistic representation of quasi-brittle behavior, with matrix softening strongly affecting the bridging response in materials such as glass fiber-reinforced polymers but playing a smaller role in fiber-reinforced cementitious composites. Crack resistance, on the other hand, diminishes substantially as the fiber inclination increases. Furthermore, embedment asymmetry markedly influences the maximum bridging force, fracture toughness, and the prevailing failure mechanism of the composite. Increasing levels of embedment asymmetry also give rise to more complex load-transfer behavior, characterized by sequential debonding, sliding, and elastic unloading and reloading of the fiber segments, ultimately leading to either complete fiber pull-out or fiber rupture.
No takes yet. Share an insight, caveat, or question.
Pirmoradi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: