Answers are grounded in this paper and cite their sources.
In this paper we report the rationale and implementation of a new building block for organic electronics based on 4,8-di(2-thienyl)-benzo[1,2- d:4,5- d ′]bis([1,2,3]thiadiazole) ( iso-BBT-T2 ) and realization of two alkyl-functionalized iso-BBT -tetrathiophene ( T4 ) alternating copolymers ( P1 with alkyl = 2DT and P2 with alkyl = 2DH ). Compared to the previously investigated small molecules/polymers based on the conventional 4,8-di(2-thienyl)-benzo[l,2- c:4,5- c ′]bis[ l,2,5]thiadiazole ( BBT-T2 ), the use of the iso-BBT heterocycle widens the polymer band gap to a region (∼1.4 eV) compatible for use in single junction solar cells. The influence of iso-BBT vs BBT structural variation on the molecular structure, electronic characteristics, and optical properties was accessed by DFT computations, single-crystal determination, optical absorption, and electrochemical measurements. In-plane charge transport for P1 and P2 was investigated in an organic thin-film transistor (OTFT) structure demonstrating hole mobilities approaching 1 cm 2 V –1 s –1 and further enhanced by off-center spin-coating method to 1.32 cm 2 V –1 s –1 . Using PC 61 BM as acceptor, a remarkable PCE of 10.28% was achieved for P1 along with a current density > 20 mA/cm 2 . The substantial PCEs of these devices, despite the relatively narrow donor energy gap, is due to retention of high open circuit voltages ( V oc > 0.8 V) as the result of the small energy loss ( E loss < 0.6 eV). Atomic force microscopy, transmission electron microscopy, and X-ray diffraction characterization further support the solar cell trends and rationalize structure–property correlations. These results demonstrate that iso-BBT-T2 -based polymers are promising candidates for both organic electronics and photonic applications.
No takes yet. Share an insight, caveat, or question.
Bianchi et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: