Answers are grounded in this paper and cite their sources.
ENEA and its industrial partner Rina Consulting-CSM (RINA CSM) contribute to the Eurofusion programme in the development of innovative RAFM steels able to withstand the critical low temperature (280-300 °C in the “water-cooling” option) foreseen for the blanket of the first DEMO reactor. Therefore the target is the development of tougher alloys, suitable to prevent the low temperature irradiation embrittlement. The DBTT shift under irradiation is affected by Helium production in addition to dpa damage. Concerning alloy design, an overall indication deriving from the first neutron irradiation campaign [1] , performed in the frame of Eurofusion as a joint experiment resulting from the collaboration of the involved laboratories, is to increase Vanadium and Nitrogen at the expense of Carbon and Manganese. Another choice concerns the reduction in Tantalum content similar to other alloys (EM10) proving limited irradiation embrittlement. The ingot (alloy 3402) has been cast according to the specifications concerning RAFM steels for fusion environment. Alternative thermo-mechanical treatments have then been applied on this RAFM steel. On the one hand the choices on the chemical composition result in a quite low DBTT after a standard double normalization and tempering treatment; −139 °C on KLST specimens. Tempering temperature results from a trade-off in order to maintain sufficient Yield Strength; 435 MPa at 300 °C. On the other hand the decrease in grain size (less than one μm), achieved by means of recrystallization treatment, leads to a transition curve that doesn’t show a sharp drop in the absorbed energy, but instead a more gradual transition from USE to LSE, further decreasing the DBTT. The tensile properties in the recrystallized condition result markedly higher at 300 °C than after conventional treatment.
No takes yet. Share an insight, caveat, or question.
Cristalli et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: