Answers are grounded in this paper and cite their sources.
When bending sharp and Jagged edges of materials and riveting different components of the cars structures, pneumatic hammers generate noise and vibration. The severity of the noise as a potential operator hazard should be considered in light of the following data. The noise produced by the six studied hammers is impact noise with more than 20 impulses per second. The average peak pressure level is 131.9 dB with the standard deviation of 2.1 dB. The equivalent level during a shift work, 8 hours per day, is 114 dB. Hand-arm vibration has also been measured in each applicable direction (x,y,z). The Z direction is the principal direction that vibration enters the hand. The average effective acceleration is 23.5 m/s2 and the standard deviation is 15.2 m/s2. The total exposure time during a shift is about 6-30 minutes which intermittently included 30-60 seconds. The measured levels correlate with operator exposures exceeding the allowable exposure time and the permissible values. This paper presents the assessment of sound pressure level and vibration acceleration magnitude produced by the pneumatic hammers and tests a noise silencer that provided as much as 9 dB of noise reduction to the tool.
No takes yet. Share an insight, caveat, or question.
Nassiri et al. (1992) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: