Answers are grounded in this paper and cite their sources.
System performance of an IBM RS/6000® workstation was improved by cooling to sub-ambient temperatures the CMOS circuits of a single-chip module (SCM) mounted on a card. However, when refrigeration temperatures are sufficiently low, the temperature of all or a portion of the card on which the module is mounted can fall below the environmental dew point, resulting in unwanted condensation. Strategically placed heaters can maintain the temperature of the card surface above the dew point, but at the expense of increasing the total heat load the refrigeration unit must remove from the system. A 3D finite element analysis was used to investigate some of the key parameters that affect the thermal packaging design of a refrigeration-cooled low-temperature processor module with the objective of preventing condensation on exposed module card surfaces with minimal power input to the added heaters.
No takes yet. Share an insight, caveat, or question.
Ellsworth et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: