Answers are grounded in this paper and cite their sources.
To monitor and quantify norovirus in water, which is responsible for gastroenteritis, passive sampler materials were developed using murine norovirus 1 (MNV-1) as a model of human norovirus. These passive samplers work by adsorption/desorption of the norovirus and a further analysis step by RT-qPCR. Two types of chitosan hydrogel were synthesized: chitosan porous beads (CS) and copper-imprinted chitosan non-porous beads (CS-IMP). They were characterized by scanning electron microscopy, N 2 sorption at 77 K and zeta potential measurements. The adsorption kinetic studies of MNV-1 revealed a quasi-equilibrium after 6 h. CS beads, of specific surface area 70 m 2 .g −1 , achieved >80 % virus adsorption within 2 h in solution spiked with MNV-1, compared to the minimal adsorption by CS-IMP beads (< 30 %). A desorption method was developed to achieve a desorption efficiency of 81.6 % and 30.8 % for CS and CS-IMP beads, respectively, using a high ionic strength (2 mol.L −1 NaCl) elution solution for 2 h at a suitable pH (9.2). Recovery rates up to ∼53 % and ∼ 69 % of MNV-1 were obtained in tap water and in wastewater, respectively. The developed passive sampling method recovers virus quantities of the same order of magnitude as direct sampling methods (50–80 % recovery rate depending on the water nature). The finding highlights the potential of chitosan-based passive samplers as an efficient tool for norovirus surveillance in tap water and wastewater. These samplers have the advantage of allowing sampling of small quantities of water (a few milliliters), which is not possible with conventional methods that require a large volume of water for virus detection.
No takes yet. Share an insight, caveat, or question.
Gibeaux et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: