Key points are not available for this paper at this time.
• GO proved to be highly efficient for the removal of bupropion and sertraline. • The adsorption process for both antidepressants was endothermic and spontaneous. • 4 kinetic and 10 isothermal models were tested. • GO exhibited a higher adsorption capacity for sertraline of 147.88 mg/g. • Single and binary pharmaceutical solutions were studied in different ratios. Graphene oxide, a material with exceptional adsorption properties, was employed for the removal of two antidepressants, sertraline and bupropion, from aqueous solutions. Batch adsorption experiments were conducted, under various conditions, to determine the optimal parameters for efficient removal. Equilibrium was met at 3 h, at pH 4 for 1 g/L of dosage, while a removal of 86 % and 98 % was achieved for bupropion and sertraline, respectively. According to Langmuir model, adsorption capacities of 147.88 mg/g and 67.35 mg/g were achieved at 25 °C for sertraline and bupropion, respectively. Thermodynamic analyses showed that the adsorption of both drugs was endothermic and spontaneous. The binary adsorption studies were performed in different ratios and revealed a higher affinity for sertraline, where a removal efficiency of > 90 % was maintained. The stability of the adsorbent under varying pH conditions was tested and showed higher stability at neutral conditions. Comprehensive material characterizations, including Fourier-transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Brunauer–Emmett–Teller (BET) surface area analysis, X-ray diffraction (XRD), and pH at the point of zero charge (pHpzc) were performed. These findings demonstrate the potential of graphene oxide as an efficient adsorbent for the removal of pharmaceuticals from wastewater.
Koltsakidou et al. (Wed,) studied this question.