Utilization of an active-clamp circuit to achieve soft switching in flyback converters

Flyback derived power convertor topologies are attractive because of their relative simplicity when compared with other topologies used in low power applications. Incorporation of active-clamp circuitry into the flyback topology serves to recycle transformer leakage energy while minimizing switch voltage stress. The addition of the active-clamp circuit also provides a mechanism for achieving zero-voltage-switching (ZVS) of both the primary and auxiliary switches. ZVS also limits the turn-off di/dt of the output rectifier, reducing rectifier switching losses, and switching noise due to diode reverse recovery. This paper analyzes the behavior of the ZVS active-clamp flyback operating with unidirectional magnetizing current and presents design equations based on this analysis. Experimental results are then given for a 500 W prototype circuit illustrating the soft-switching characteristics and improved efficiency of the power converter. Results from the application of the active-clamp circuit as a low-loss turn-off snubber for IGBT switches is also presented.