Answers are grounded in this paper and cite their sources.
Red-emitting Mn 4+ -doped fluoride phosphors are recognized as promising materials for high-performance warm white light-emitting diodes (WLEDs). However, the extensive use of toxic hydrofluoric acid in traditional synthesis methods hinders their development and commercialization. Furthermore, the traditional solid-phase method often has cumbersome sintering steps, high temperature, long holding time, and certain safety hazards, so it is very necessary to develop a green synthesis method with simple steps and low energy consumption. In this study, a low-temperature solid-state method is proposed to synthesize Rb A SiF 6 :Mn 4+ ( A = K, Cs) phosphors by one step. Optimal emission intensities were observed at Mn 4+ concentrations of 1.2 % in RbKSiF 6 and 2.1 % in RbCsSiF 6 . These phosphors demonstrated high thermal stability. At 423 K, the photoluminescence intensities of RbKSiF 6 :1.2 %Mn 4+ and RbCsSiF 6 :2.1 %Mn 4+ reached 114 % and 87 % of their respective values at room temperature. Meanwhile, the chromaticity shifts were almost negligible, and high color purity was achieved for both phosphors. The electro-optical performance of WLED devices utilizing these phosphors, in combination with YAG:Ce 3+ and GaN chips, showed high color rendering indices (CRI) and low correlated color temperatures (CCT) across varying currents. Specifically, under a driving current of 20 mA, the device incorporating RbKSiF 6 :1.2 %Mn 4+ exhibited a CRI of 94 and a CCT of 3732 K, with a luminous efficacy of 61 lm/W. These findings highlight the potential of green-synthesized RASFM phosphors in advancing the application of warm WLEDs.
No takes yet. Share an insight, caveat, or question.
Gao et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: