Answers are grounded in this paper and cite their sources.
Brick-and-mortar carbon fibre laminates offer high damage tolerance, multiple energy dissipation mechanisms and improved formability. However, their mechanical performance remains considerably inferior to that of their natural counterparts. A key advantage of natural materials lies in their complex hierarchical structures spanning multiple length scales. Although numerous studies have demonstrated the benefits of introducing small quantities of nanofiller into carbon fibre laminates, their behaviour within brick-and-mortar architectures remains unclear. Herein, we examined the effect of incorporating graphene oxide (GO) into carbon fibre/epoxy brick-and-mortar laminates. Continuous-fibre and brick-and-mortar laminates with a fibre length of 25 mm were fabricated via hand lay-up and autoclave-cured using standard prepreg and prepreg modified with GO (0.68 wt%). Tensile testing revealed a 50% reduction in tensile strength compared to continuous laminates; however, the addition of GO partially mitigated this loss, resulting in a 12% improvement in tensile strength. Additionally, brick-and-mortar laminates exhibited in an 18% increase in Mode I fracture toughness relative to continuous laminates owing to crack deflection and the associated Mode II contribution. By contrast, the effect of GO was found to be negligible. The Mode II fracture toughness of the brick-and-mortar laminates demonstrated a 46% improvement in the fourth loading cycle compared to continuous laminates. Fractographic analysis confirmed that while GO modified fracture surfaces at the microscale, its contribution to macroscopic energy dissipation mechanisms was overshadowed by dominant architectural effects and remained modest owing to its low concentration. Through GO modification, this study establishes a foundation for developing carbon fibre-reinforced polymers with enhanced defect tolerance and fracture resistance.
No takes yet. Share an insight, caveat, or question.
Rodriguez-García et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: