Answers are grounded in this paper and cite their sources.
A cationic polymer containing tris(4,4‘-dialkyl-2,2‘-bipyridyl)ruthenium groups linked by aliphatic spacers was studied as a photosensitizer for the catalytic oxidation of water in the presence of colloidal IrO 2 . The polymer−colloidal IrO 2 system photocatalytically reduced persulfate, a sacrificial electron acceptor, and oxidized water to O 2 and H + in solutions that were buffered at pH 6 by Na 2 SiF 6 and NaHCO 3 . The quantum efficiency for O 2 evolution and turnover number with respect to the Ru complex in the polymer reached 25% and 100, respectively. The polymer gradually aggregated in the Na 2 SiF 6 −NaHCO 3 buffer during the reaction, and this aggregation gradually decreased the photocatalytic activity of the system. Heterogeneous photosystems composed of this polymer and colloidal IrO 2 were also prepared using 70 nm diameter SiO 2 particles as supports. Photocatalysts made by the sequential loading of colloidal IrO 2 and the photosensitizer polymer onto SiO 2 particles at ca. pH 6 had much lower photocatalytic activity than did the unsupported system, presumably because there was little physical contact between the polymer and colloidal IrO 2 particles under these conditions. The most efficient heterogeneous photocatalyst was obtained by the adsorption of a mixture of the polymer and colloidal IrO 2 onto SiO 2 in Na 2 SiF 6 −NaHCO 3 solution. This composite had a high activity, comparable to that of the polymer−colloidal IrO 2 system. Transmission electron microscopy showed that the colloidal IrO 2 particles were covered with the polymer, which had aggregated in the solution. This result indicates that the polymer−IrO 2 aggregates retain their activity when immobilized on a support that might be used to organize overall water splitting systems.
No takes yet. Share an insight, caveat, or question.
Hara et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: