Answers are grounded in this paper and cite their sources.
This paper is to discuss the recent observations of elemental mercury (Hg 0 ) reemissions from a pilot-scale limestone wet scrubber. Simulated flue gas was generated by burning natural gas in a down-fired furnace and doped with 2000 ppm of sulfur dioxide (SO 2 ). Mercuric chloride (HgCl 2 ) solution was delivered to the scrubber at a controlled rate to simulate the absorption of ionized mercury (Hg 2+ ). Testing results have shown that, after Hg 2+ was injected, elevated Hg 0 concentrations were soon detected both in the scrubber effluent flue gas and the hold tank air, which reflected the occurrence of Hg 0 reemissions in both places. When the HgCl 2 feed was stopped, the Hg 0 reemission continued for more than 2 h. In addition, a significant Hg 0 reemission was also detected outside the scrubber loop. In an attempt to understand the Hg 0 reemission increase across the wet scrubber system under transient and steady states and to understand the underlying relationship with the mercury complexes retained in the wet scrubber system, a mercury reemission model was developed. With this model, it was found that the Hg 0 reemission rate under the current testing conditions can be simulated by a first-order reaction, and only a portion of Hg·S(IV) complexes retained in the slurry were participating in the reemission reaction.
No takes yet. Share an insight, caveat, or question.
Chang et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: