Answers are grounded in this paper and cite their sources.
One of the major hurdles of Ni‐rich cathode materials Li 1+ x (Ni x Co z Mn z ) w O 2 , y > 0.5 for lithium‐ion batteries is their low cycling stability especially for compositions with Ni ≥ 60%, which suffer from severe capacity fading and impedance increase during cycling at elevated temperatures (e.g., 45 °C). Two promising surface and structural modifications of these materials to alleviate the above drawback are (1) coatings by electrochemically inert inorganic compounds (e.g., ZrO 2 ) or (2) lattice doping by cations like Zr 4+ , Al 3+ , Mg 2+ , etc. This paper demonstrates the enhanced electrochemical behavior of Ni‐rich material LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) coated with a thin ZrO 2 layer. The coating is produced by an easy and scalable wet chemical approach followed by annealing the material at ≥700 °C under oxygen that results in Zr doping. It is established that some ZrO 2 remains even after annealing at ≥800 °C as a surface layer on NCM811. The main finding of this work is the enhanced cycling stability and lower impedance of the coated/doped NCM811 that can be attributed to a synergetic effect of the ZrO 2 coating in combination with a zirconium doping.
No takes yet. Share an insight, caveat, or question.
Schipper et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: