Answers are grounded in this paper and cite their sources.
Ferroelectric ceramics with intrinsic ferroelectric photovoltaic (FEPV) effect generate open-circuit voltage far exceeding the material’s band gap, holding great potential to break the Shockley-Queisser limit of conventional photovoltaics. However, the effect of ferroelectric layer thickness on key metrics (open-circuit voltage {Voc} , short-circuit current density {Jsc} ) remains unclear, severely restricting FEPV device optimisation. In this work, 0.9875( {Bi1/2Na1/2} ) TiO_3 -0.0125Bi( {Zn1/2Nb1/2} ) {O3-δ} ceramics with thicknesses of 118-930 μm were fabricated via a solid-state reaction method and their photovoltaic responses were systematically characterized. J-V measure- ments on samples with thicknesses of 118-930 μm show that {Voc} rises linearly from 23.7 V (118 μm) to 109.7V (730 μm) and then drops to 103.7 V (930 μm), while {Jsc} decreases non-linearly from 8.85 to 0.37 μA/ cm² as thickness of ferroelectric layer increases. To elucidate the underlying mechanism, a layered equivalent physical model was constructed, producing {Jsc} ∝ A · d/( e^{{α·d}} − 1) and that {Voc} ∝ d. The derived formulas agree well with experimental data, achieving a coefficient of determination R² > 0.965. This work revises the application limitations of the traditional Glass model, establishes a thickness-photovoltaic performance relationship adapted to practical device working scenarios, and provides theoretical and experimental support for the structural design and performance optimization of BNT-based FEPV devices.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: