Answers are grounded in this paper and cite their sources.
The water environment has great influence on proton dissociation which leads to a positive contribution to conductivity in direct methanol fuel cells (DMFCs). Here, amino propyl-functionalized mesoporous silica (NH 2 –SiO 2 ) is synthesized to regulate the water environment within sulfonated poly(arylene ether ketone) membranes. Among the obtained membranes, a good water conservation ability is obtained in SPAEK/NH 2 –SiO 2 -5% (the water desorption coefficient is as low as 1.45 × 10 –10 cm 2 s –1 at 80 °C). Moreover, proton conductivity is improved from 0.044 to 0.159 S cm –1 at 95 °C. To demonstrate the feasibility of organic–inorganic composite membranes, a series of investigations have been performed. The NH 2 –SiO 2 possesses a uniform pore size of 61.6 Å and high BET surface area of 653 m 2 g –1, which contribute to hydrophilicity. Good compatibility facilitates widespread distribution throughtout the membrane. As a result, a restricted swelling ratio and enhanced water conservation environment has been built. The direct methanol fuel cell performance is recorded at 51.1 mW cm –2 power density, fed with 2 M methanol at 80 °C.
No takes yet. Share an insight, caveat, or question.
Li et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: