Answers are grounded in this paper and cite their sources.
Shear stress—shear strain curves of Cu and α-brass single crystals have been obtained over a wide range of alloy compositions, temperatures, initial orientations and strain rates. Analysis of the work-hardening characteristics leads to the following main conclusions: (i) for Cu the work-hardening rate during easy glide increases with temperature; (ii) in α-brass stage I ends when the resolved shear stress on the conjugate system equals the initial resolved shear stress on the primary system; (iii) the extent of easy glide increases with decreasing temperature and increasing alloy content, and the temperature dependence of easy glide decreases with increasing alloy content; (iv) the work-hardening rate θ11 during stage II is greater for orientations near symmetrical positions, and this orientation dependence is found at 4•2, 77 and 295°K for both Cu and α-brass; (v) θ11 increases with decreasing temperature, especially in the alloys; (vi) the temperature dependence of θ11 for pure metals is very s...
No takes yet. Share an insight, caveat, or question.
Mitchell et al. (1963) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: