Answers are grounded in this paper and cite their sources.
The galvanostatic plating of Cu-Al alloy was examined at a platinum electrode in solutions of in the 60.0-40.0 mol % aluminum chloride-1-ethyl-3-methylimidazolium chloride room-temperature molten salt at 28°C using periodic-current plating techniques. The plating techniques that were investigated include pulse current, superimposed-pulse current, and reverse-pulse current. The composition of the electrodeposited alloy was determined by using rotating ring-disk anodic linear sweep voltammetry. The electrodeposition of Cu-Al is complicated by the instability of the alloy in solutions containing If alloy electrodeposits are removed from cathodic protection while immersed in the plating bath, a condition that occurs during the pulse plating "off-time," in the plating solution oxidizes Al from the electrodeposits. The rate of this displacement reaction is greatest for small values of but decreases as becomes longer, suggesting that a copper-rich layer forms on the electrodeposits that blocks the displacement reaction. The displacement reaction can be minimized by lowering the concentration at the electrode surface through the application of a superimposed current during whose magnitude is comparable to that of the limiting current for © 2001 The Electrochemical Society. All rights reserved.
No takes yet. Share an insight, caveat, or question.
Zhu et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: