A novel micromechanical infrared (IR) radiation sensor has been developed using commercially available piezoresistive microcantilevers. Microcantilevers coated with a heat absorbing layer undergo bending due to the differential stress between the top layer (coating) and the substrate. The bending causes a change in the piezoresistance and is proportional to the amount of heat absorbed. The microcantilever IR sensor exhibits two distinct thermal responses: a fast one (<ms) and a slower one (∼10 ms). A noise equivalent power (at a modulation frequency of 30 Hz) was estimated to be ∼70 nW/Hz1/2. This value can be further reduced by designing microcantilevers with better thermal isolation that can allow microcantilevers to be used as uncooled IR radiation detectors.
No takes yet. Share an insight, caveat, or question.
Datskos et al. (1996) studied this question.