Answers are grounded in this paper and cite their sources.
Introduction The surface microphone (SM) is a promising sensor for predicting the output of bone conduction hearing aids (BCHAs), providing a non-invasive approach for device fitting and verification. Previous studies have demonstrated reliability in both experimental and clinical settings by comparing measured sound pressure levels with invasive reference measurements and aided hearing thresholds, particularly at low and mid frequencies. However, at higher frequencies, these studies reported inconsistencies regarding the reliability of SM-based output assessment. The present study aimed to investigate the relationship between forehead volume velocity and the resulting sound pressure measured by the SM, with a specific focus on the frequency-dependent influence of skin dynamics on the output reliability. Methods Different BCHAs were mounted on five fresh-frozen human cadaver heads and temporal bone samples. Skin motion beneath and adjacent to the surface microphone (SM), as well as motion of the SM housing itself, was measured on one cadaver head using a laser Doppler vibrometer to obtain one-dimensional velocity and calculated volume velocity data. Custom-built SM units of varying sizes were positioned on the forehead, and measurements were conducted under controlled variations of contact force to evaluate their effect on SM output. Finally, a lumped-element model driven by the measured volume velocity was used to predict the expected cavity pressure and was compared with ear-canal sound pressure measurements obtained on four cadaver heads. Results The study demonstrated a measurable interaction between forehead volume velocity, average surface motion, and the sound pressure levels recorded by the SM. Skin motion exhibited a significant rigid body component that directly influenced SM output. However, the observed decrease in volume velocity at higher frequencies suggests a damping effect caused by modal motion of the skin relative to the underlying bone. The findings further indicate that reducing SM size may mitigate modal motion and thereby increase volume velocity in the higher frequency range. Conclusions The findings underline the critical role of skin properties in determining surface microphone accuracy and its implications for BCHA fitting. However, its accuracy is affected and limited by the complex interaction at higher frequencies between the motion of the skin, the device and the underlying bone.
No takes yet. Share an insight, caveat, or question.
Mair et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: