This is the authors' abstract. We don't add key points for this paper.
A low-power interferer-robust mixer-first receiver front end that uses a novel capacitive stacking technique in a bottom-plate N-path filter/mixer is proposed. Capacitive stacking is achieved by reading out the voltage from the bottom plate of N-path capacitors instead of their top plate, which provides a 2× voltage gain after downconversion. A step-up transformer is used to improve the out-of-band (OOB) linearity performance of small switches in the N-path mixer, thereby reducing the power consumption of switch drivers. This article explains the concept of implicit capacitive stacking and analyzes its transfer characteristics. A prototype chip, fabricated in 22-nm fully depleted silicon on insulator (FDSOI) technology, achieves a voltage gain of 13 dB and OOB IIP3/IIP2 of +25/+ 66 dBm with 5-dB noise figure while consuming only 600 μW of power at fLO= 1 GHz. Thanks to the transformer, the prototype can operate in the input frequency range of 0.6-1.2 GHz with more than 10-dB voltage gain and 5-9-dB noise figure. Thus, it opens up the possibility of low-power software-defined radios.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Purushothaman et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: