Answers are grounded in this paper and cite their sources.
In this paper, we report the study of the production of MoTe2 (molybdenum ditelluride) samples after a high dose of electron irradition. A 2 MeV Van de Graaff accelerator was used to irradiate the sample at the following conditions: 1.3 MeV voltage, 5 μA current, 25 kGy/min dose rate, and 1000 kGy total dosage. These conditions are maintain fixed while the irradiation dosages were changed to 50, 100, 200, and 500 Mrad. The optimization of the dosage used for the production of MoTe2 nanotubes was obtained from the analysis of the samples that were examined in a high-resolution transmission electron microscope. The most efficient production of MoTe2 nanotubes was obtained at the range between 100 and 200 Mrad. A very typical characteristic was obtained for rotated structures with angles of 4, 5, 7, 8, and 12° observed in the diffraction pattern for MoTe2.
No takes yet. Share an insight, caveat, or question.
Flores et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: