Answers are grounded in this paper and cite their sources.
Dataset of received signal strength indication (RSSI) collected from within an indoor office building. This data set provides a comprehensive set of received signal strength indication (RSSI) readings from within an indoor office building from several perspectives throughout the building. date/time of measurement start: 2007-08-17 date/time of measurement end: 2007-08-17 collection environment: This data set provides a comprehensive set of received signal strength indication (RSSI) readings from within an indoor office building from several perspectives throughout the building. The office building environment is a single storey building measuring roughly 50 x 70 meters. The interior consists of small offices, cubicles, long hallways, and large warehouse-like rooms. A floor plan of this environment with measurement points and the passive monitors' locations labeled is provided in [Figure: Floorplan]. This data set was collected by researchers at the University of Colorado over the course of one day in August 2007. network configuration: Hardware Specifications Monitors: D-Link DWL-AG530 card with omnidirectional dipole antenna 2-4 dBi Transmitters: WNC WLAN Cardbus Adaptor CB9 card with omnidirectional dipole antenna 2-4 dBi Directional Transmitters: WNC WLAN Cardbus Adaptor CB9 card with "Super Cantenna" (shown in [Figure: Cantenna]) 12 dBi 30 degree beam width directional antenna data collection methodology: Since the human body tends to attenuate 2.4 GHz transmissions, we transmit packets while facing each of the four cardinal directions. All measurement packets are recorded by 5 passive monitors, which are commodity linux machines with 802.11 cards. Traceset of received signal strength indication (RSSI) in text format, collected from within an indoor office building. Omnidirectional RSSI measurements are collected from roughly 180 distinct physical locations throughout a large office building. To quantify how the transmitter's received signal strength varies with their physical location in the building, we transmit 500 packets from each of the 180 physical positions. Since the human body tends to attenuate 2.4 GHz transmissions, we transmit packets while facing each of the four cardinal directions. All measurement packets are recorded by 5 passive monitors, which are commodity linux machines with 802.11 cards. Each RSSI measurement is labeled with the transmitter's physical location. In addition, at each of the 180 measurement locations, we transmit 500 packets in each of the four cardinal directions using transmit power control. Frames are transmitted at each transmit power level between 10-20 dBm. We also have a limited number of measurement points where the packets are transmitted using an inexpensive directional antenna commonly called a "cantenna". Transmit power control is also applied. The cantenna that we used is displayed in [Figure: Cantenna]. This data set was collected by researchers at the University of Colorado over the course of one day in August 2007. cu/rssi/text Traces <x coordinate> <y coordinate> <transmit power level (in dBm)> <directional transmitter? (y/n)> <rssi values from monitors 1...5> <x coordinate> <y coordinate> <transmit power level (in dBm)> <directional transmitter? (y/n)> <rssi values from monitors 1...5> <x coordinate> <y coordinate> <transmit power level (in dBm)> <directional transmitter? (y/n)> <rssi values from monitors 1...5> Traceset of received signal strength indication (RSSI) in pcap format, collected from within an indoor office building. Omnidirectional RSSI measurements are collected from roughly 180 distinct physical locations throughout a large office building. To quantify how the transmitter's received signal strength varies with their physical location in the building, we transmit 500 packets from each of the 180 physical positions. Since the human body tends to attenuate 2.4 GHz transmissions, we transmit packets while facing each of the four cardinal directions. All measurement packets are recorded by 5 passive monitors, which are commodity linux machines with 802.11 cards. Each RSSI measurement is labeled with the transmitter's physical location. In addition, at each of the 180 measurement locations, we transmit 500 packets in each of the four cardinal directions using transmit power control. Frames are transmitted at each transmit power level between 10-20 dBm. We also have a limited number of measurement points where the packets are transmitted using an inexpensive directional antenna commonly called a "cantenna". Transmit power control is also applied. The cantenna that we used is displayed in [Figure: Cantenna]. This data set was collected by researchers at the University of Colorado over the course of one day in August 2007. cu/rssi/pcap Traces pcap/raw: Traces of received signal strength indication (RSSI) in pcap format, collected from within an indoor office building. [T:C:]<x coordinate><y coordinate><K=dev1 or E=dev2><orientation in {0, 1, 2, 3}><transmit power level (in dBm)><sequence number> If the string is less than 32 bytes, then it is padded with nulls. "Orientation" denotes which direction the human data collector is facing while transmitting packets. 0 is "down", 1 is "left", 2 is "up", and 3 is "right". These directions are relative to the building's floor plane provided in [Figure: Floorplan]. "[T:C]" indicates that the directional antenna was used; otherwise, an omnidirectional antenna was used. An example of an omnidirectional measurement point in the pcap trace: 1:8:K:0:16:0 The omnidirectional transmitter is positioned at x=2.4384, y=19.5072; K=dev1 card was used; orientation=0 ("down"); transmit power=16 dBm; sequence number=0. An example of a directional measurement point in the pcap trace: T:C:7.5:14.5:E:0:10:105 The T:C=directional transmitter is positioned at x=18.2880, y=35.3568; E=dev2 card was used; orientation=0 ("down"); transmit power level=10 dBm; sequence number=105.
No takes yet. Share an insight, caveat, or question.
Bauer et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: