Answers are grounded in this paper and cite their sources.
4H-SiC has been widely exploited in semiconductor industry. Nevertheless, the scratch-free surface with less oxide layer (required for its high-performance) is difficult to realize at high efficiency. Hence, to address this issue, an electrochemical mechanical polishing (ECMP) test was conducted based on the electrochemical-mechanical balance between the SiC corrosion rate and the SiO 2 layer removal rate. Firstly, we synthesized polystyrene (PS)/CeO 2 core/shell abrasives, which have the potential to obtain the high-quality surface due to its elastic effect. These as-synthesized abrasives were then characterized by FESEM and XRD. Results showed the CeO 2 shells were coated on the PS cores successfully. Next, equations of the SiO 2 layer removal rate and the SiC corrosion rate were experimentally obtained based on the modified Preston's equation and the Faraday's law of electrolysis, respectively. Finally, a verified test for 4H-SiC-ECMP was conducted in a 0.2 M NaOH electrolyte solution containing 5.0 wt% PS/CeO 2 abrasives. After ECMP, these samples were characterized by microscope, AFM, Raman spectrometer and profile-meter, respectively; and the scratch-reduction mechanisms were deduced based on these characterization results. Results showed under balanced conditions, the scratch-free surface ( R a : 0.449 nm) with less oxide layer was obtained at high efficiency (∼2.3 μm/h).
No takes yet. Share an insight, caveat, or question.
Gao et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: