Answers are grounded in this paper and cite their sources.
This study demonstrates DLP-printed mini-channel filters. Arrays with 0.5 and 1.0 mm apertures were made from plant-derived UV resin and characterized by geometry, wettability, FT-IR, SEM-EDS, three-point bending with FEA, and filtration tests. Cured resin showed contact angles of 72° (flat), 86° (0.5 mm), and 78° (1.0 mm). Time-lapse imaging showed imbibition in 1.0 mm channels (~0.26 s) but slower uptake in 0.5 mm channels (~95 s), consistent with capillary and Washburn scaling. Flexural tests showed higher strength for 0.5 mm channels (12.41 MPa) but greater flexibility for 1.0 mm channels (10.33 MPa); failure modes matched FEA, which reproduced maximum stresses within 0.16% (0.5 mm) and 8.32% (1.0 mm). Filtration showed sawdust retention yet more clogging for 0.5 mm, higher throughput but lower capture for 1.0 mm, with performance converging at 5% sawdust. SEM revealed clogging-prone micro-bumps, while FT-IR confirmed polymerization and sawdust-related bands, showing resins enable efficient, reliable filtration.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: