Answers are grounded in this paper and cite their sources.
High Resolution Image Download MS PowerPoint Slide Long-term physical aging and plasticization, two mobility -based phenomena that are counterintuitive in the context of “rigid” polymers of intrinsic microporosity (PIMs), were evaluated using pure- and mixed-gas permeation data for representative ladder and semiladder PIMs. PIMs between 1 and 4 years old retained from 10- to 1000-fold higher H 2 and O 2 permeabilities than commercial membrane materials with similar or higher selectivities. A triptycene-based ladder polymer (TPIM-1) exhibited very large selectivity gains outweighing permeability losses after 780 days, resulting in unprecedented performance for O 2 /N 2 (P(O 2 ) = 61 Barrer, α(O 2 /N 2 ) = 8.6) and H 2 /N 2 (P(H 2 ) = 1105 Barrer, α(H 2 /N 2 ) = 156) separations. Interestingly, TPIM-1 aged more and faster than its more flexible counterpart, PIM-1, which exhibited P(O 2 ) = 317 Barrer and α(O 2 /N 2 ) = 5.0 at 1380 days. Additionally, the more “rigid” TPIM-1 plasticized more significantly than PIM-1 (i.e., TPIM-1 endured ∼93% increases in mixed-gas CH 4 permeability over pure-gas values compared to ∼60% for PIM-1). A flexible 9,10-bridgehead (i.e., TPIM-2) mitigated the enhancements induced by physical aging but reduced plasticization. Importantly, intra -chain rigidity alone, without consideration of chain architecture and ultra -microporosity, is insufficient for designing aging- and plasticization-resistant gas separation membranes with high permeability and high selectivity
No takes yet. Share an insight, caveat, or question.
Swaidan et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: