Answers are grounded in this paper and cite their sources.
Many changes that occur in the frying process were affected by oil type and potato to oil ratio (frying load) as well as the uniform distribution of oil temperature is important in different parts of the fryer due to the uniform frying of food. Therefore, with monitoring the distribution of temperature, oil and miosture in the product over time, the frying process can be controlled more effectively and reached a deeper understanding of this complex process. Therefore, the aim of this study was to investigate the effect of three types of oil (sunflower, soybean and canola), three types of frying times (1:20, 1:15 and 1:10 kg of potatoes per liter of oil) and four different positions in the fryer on temperature distribution, the moisture and oil content in the potato pieces in the four time intervals of 90, 180, 270 and 360 seconds. The statistical analysis of the data showed that frying load has a significant effect on the loss of moisture and oil absorption, while the potato position in the fryer has not significant effect. By increasing the frying load, the amount of oil absorption and the final moisture of potatoes increased. The results indicated that the temperature of the potato center was not affected by the type of oil and frying load and the center temperature was estimated about 96-95. Unlike the center temperature, the surface temperature was affected by the ratio of potato to oil and increased by increasing the frying load. According to the results of the present study, to reduce the absorbed oil, the appropriate ratio of potatoes to oil must be used, while the type of oil and the location of potatoes
No takes yet. Share an insight, caveat, or question.
qaderi et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: