Answers are grounded in this paper and cite their sources.
A slender tubular column subjected to radial constraints exhibits dual nonlinearity in geometry and contact under axial loading, posing significant challenges for post-buckling configuration analysis and theoretical calculations. To address this, this study proposes a virtual transient dynamic finite element solution model. By introducing substantial damping to effectively attenuate the system's dynamic response, the stable characteristic post-buckling evolution configuration of the inner tubular column is obtained. Furthermore, the critical axial loads and associated mechanical parameters for each post-buckling mode were analyzed, while the influence of different boundary conditions on the post-buckling configurations was investigated. Research indicates that as axial load increases, the contact state of the inner tube column gradually transitions from point contact to continuous contact during the formation of its spiral buckling configuration. This spiral buckling configuration comprises two equal-length unsupported segments and one continuous contact segment. The study also found that the buckling critical load under fixed-end conditions is higher than that under pinned-end conditions, but the latter exhibits larger end displacement amplitudes and helical direction angles. Experiments indicate that the maximum average deviations of the critical loads for sinusoidal and helical buckling configurations from theoretical values are 20.05% and 5.51%, respectively, demonstrating the high accuracy of this finite element solution model. This study provides a solution to the static analysis challenges arising from abrupt changes in tubular buckling configurations and lays a crucial foundation for subsequent research on the dual nonlinearity of multi-layer concentric tubular buckling.
No takes yet. Share an insight, caveat, or question.
Cheng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: