This is the authors' abstract. We don't add key points for this paper.
A novel tungsten carbide (WC)-reinforced nickel (Ni)-based laser cladding layer was prepared through an in-situ synthesis process. The influence of different concentrations of CeO2/Y2O3 on the microstructure, wear, and corrosion resistance of the in-situ synthesized WC-reinforced Ni-based cladding layer was analyzed. The results revealed that the coatings doped with rare-earth oxides exhibited good micro-hardness (660 HV0.2) and wear resistance when the rare-earth oxide content reached 0.75% CeO2 and 1.50% Y2O3. Additionally, the minimum corrosion rates of the coating were measured at 0.002770 mm/a and 0.0022548 mm/a at 1.5% CeO2 and 1.5 Y2O3 doping, with noble Ecorr values ranging from -0.12549 V to -0.49924 V and lower Icorr values ranging from 2.3550?10-7 A?cm2 to 1.9170?10-7 A?cm2. Furthermore, the wear resistance of the cladding layer was significantly higher than that of the substrate. Both the cladding layer and the substrate exhibited a mixed-wear mode, and they exhibit adhesive wear in wet friction environments.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: