Answers are grounded in this paper and cite their sources.
The occurrence of a high-resistivity region (i layer) at the interface of n-type GaAs films on n+ GaAs substrates has been a recurring problem in the halide synthesis transport growth of these films for microwave devices. Consistent success in the elimination of an i layer in the doping profile has been achieved by deposition of an n+ epitaxial film substrate prior to growth of the active n film, however the nature and cause of the i layer has remained unknown. It has been proposed by others that the i layer is caused by the presence of an impurity in that region. Under this assumption, a new analytical tool, the Direct Image Mass Analyzer (DIMA, Bell & Howell/CEC) has been used to obtain depth impurity profiles of known impurities through five homoepitaxial n-on-n+ GaAs film samples. These samples differed in the type of dopants used in the film and substrate, and in the magnitude of the i layers. The data were compared with doping profiles, and an analysis of this comparison has led to the following conclusions: (1) The impurities that are present in these samples include Si, K, Li, C, Na, Fe, F, Cl, and Mn; (2) the presence of an i layer is correlated with the presence of a high concentration (∼1×1021/cm3) of silicon in the i layer region; and (3) the origin of the silicon is probably external to the sample. The hardware of the reactor is a likely source of silicon, and a mechanism is proposed for the transport of the silicon into the growing film.
No takes yet. Share an insight, caveat, or question.
DiLorenzo et al. (1971) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: