This is the authors' abstract. We don't add key points for this paper.
Manganese oxide coated zeolite (MOCZ) has been demonstrated in the present issue as a potential adsorbent for the removal of manganese (Mn 2+ ) from Mn 2+ containing aqueous solution by batch adsorption process. The adsorption capacity of the as-prepared MOCZ was determined over the parameters of contact time, adsorbent dosage, pH and Mn 2+ concentration. Surface properties of the MOCZ were analyzed by Brunauer–Emmett–Teller, X-ray diffraction and field emission scanning electron microscopy. Results showed that MOCZ has a high degree of crystallinity and the surface of MOCZ is mainly vernadite (γMnO 2 ) with a specific surface area and average pore diameter of 39.9 m 2 g –1 and 1.17 nm, respectively. Besides, the adsorption process was found to be strongly pH-dependent and Mn 2+ adsorption increased with pH and adsorbent dosage. Adsorption kinetics of Mn 2+ /MOCZ system followed pseudo-second-order model successfully and equilibrium data were fitted with isotherm models of Langmuir and modified Langmuir. As-proposed two sites one molecule adsorption mechanism fitted well with the equilibrium data and maximum adsorption capacity of Mn 2+ was found to be 0.93 meq Mn 2+ g –1 . Therefore, MOCZ can be employed as an effective and alternative to commercial adsorbents for the removal of manganese from an aqueous solution.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Rahman et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: