Answers are grounded in this paper and cite their sources.
Reverse homogeneous precipitation (RHP) method was successfully applied for dispersing perovskite type oxides finely on carbon support. Mixing the colloidal particles of about 10 nm in size obtained by RHP method with a 2-propanol dispersion of carbon black resulted in precipitation of a precursor/carbon composite, which was further converted into a oxide/carbon composite by calcination. Microscopic observation revealed that nano-sized oxide particles were dispersed fairly well in the carbon support. When applied to gas diffusion-type electrodes, the 30 mass % /carbon composite thus prepared showed far more excellent oxygen reduction activity than the 50 mass % /carbon composite conventionally prepared by mechanical mixing. The electrode gave current density as high as at −110 mV ( vs. Hg/HgO) in 8 M KOH at 60°C under air flow. Oxygen reduction activity of the /carbon composites decreased with increasing y , though the composite at was still more active than the composite prepared conventionally by traditional way.
No takes yet. Share an insight, caveat, or question.
Imaizumi et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: