Answers are grounded in this paper and cite their sources.
RF sputtered Co0.78−xCr0.22Rhx (where x is 0–0.06) alloy films for high density perpendicular recording were studied. First, Co-M (M = Cr, Ti, V, Mo, Pd, and Rh) alloy films were studied. They exhibit hcp crystallization and have a high orientation of the c-axis normal to the film plane. However, they have a smaller coercive force (less than 300 Oe), and with the exception of Co-Cr, they do not have a columnar structure or satisfy the relation Hk ≳4πMs. Next, Co-Cr-Rh alloy films were studied. They also exhibit hcp crystallization and their structure is columnar. They show perpendicular magnetic anisotropy similar to that of Co-Cr, and in particular, a higher c-axis orientation was obtained. The ΔΘ50, half the width of a rocking curve of a (002) peak, is about 20–40% smaller than that of Co-Cr. By measuring the recording characteristics of Co-Cr-Rh disks (on an anodized aluminum substrate), a maximum recording density of 23,000FRPI was obtained.
No takes yet. Share an insight, caveat, or question.
Kobayashi et al. (1981) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: