Answers are grounded in this paper and cite their sources.
The power transmission is mechanical in most machines, and it is commonly achieved in the use of gear transmissions.Mechanical gear transmissions have a high torque density, but the friction occurs in them, which is often the cause of the gear failure.Also, the noise, heat and vibration are present, so the reliability of these gears is reduced.Nowadays, it is more and more taken care of the energy conservation, and therefore the environment as well, when designing new products.The goal is to reduce the noise, vibration, to simplify maintenance more, reduce heat and reduce dimensions.The magnetic gears are the new type of gears, which attract the attention of the constructors because of the possibility to overcome some of these problems.These are non-contact gears, where the power and torque transmission is achieved with the help of magnetic forces.Friction, wear and fatigue are not present in magnetic gears, they do not require lubrication, and they can be applied as a protective mechanism against overloading.They can operate in a wide temperature range, from -270°C to 350°C.Also, the operation is reversible, so the same device, in which they are installed, can be used as a reducer and as a multiplier.The concept of magnetic gear was proposed about a hundred years ago.Their main advantage, in comparison to the conventional gears, the lack of contact and wear of teeth, was the reason enough for the further development of magnetic gears.However, the low efficiency, complex structure and high costs of their making, represented a significant problem.The production of magnetic gears for general industrial applications was enabled with the development of new magnetic materials of high magnetic permeability, the new precise production techniques and advanced modelling tools.Thus, the number of researchers interested in the development of structural solutions and performances of magnetic gears has grown.Historical overview of magnetic gears, as well as achievements accomplished in this area, has been presented in the literature [1].There are a large number of papers on the topic of magnetic gears.Figure 1 shows the number of papers published from 1900 to 2015, obtained from the literature [1,2] and the available data on published papers.
No takes yet. Share an insight, caveat, or question.
Miladinović et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: