This is the authors' abstract. We don't add key points for this paper.
A watt-level, high-efficiency single-frequency distributed Bragg reflector (DBR) fiber laser emitting at 1941 nm was demonstrated using a Tm 3+ -doped yttrium aluminum garnet (Tm:YAG) crystal-derived silica fiber (TYCDSF). The TYCDSF, featuring a core doping concentration of Tm 2 O 3 as high as ∼12.17 wt.% and a gain coefficient of 5.10 dB/cm at 1941 nm, was fabricated through the molten core method (MCM). By employing a 16-mm-long TYCDSF and in-band core pumping with a 1610 nm fiber laser, a stable single-frequency laser with a maximum output power of 1030 mW and a slope efficiency of 50.83% for absorbed pump power was achieved. The laser exhibited an optical signal-to-noise ratio exceeding 66.5 dB and a laser linewidth of approximately 40.75 kHz. To the best of our knowledge, this is the first demonstration of a watt-level single-frequency laser based on YAG crystal-derived silica fiber (YCDSF). Moreover, the slope efficiency achieved in this work is the highest reported for single-frequency lasers in the 2-μm band.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Wei et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: