Answers are grounded in this paper and cite their sources.
Sulfur incorporated nanocrystalline carbon (n-C:S) thin films were grown on molybdenum substrates by a hot-filament chemical vapor deposition technique using gas mixtures of methane, hydrogen, and a range of hydrogen sulfide (H2S) concentrations (100–500 ppm with an interval of 100 ppm) at a fixed substrate temperature of 900 °C. They were optically characterized using Raman spectroscopy (RS) and ex situ spectroscopic phase modulated ellipsometry from near-infrared to near UV (1.5–5.0 eV) obtaining their vibrational frequencies and pseudodielectric function, respectively, as a function of [H2S]. The ellipsometry data [〈εr(E)〉,〈εi(E)〉] were modeled using Bruggeman effective-medium theory and dispersion relations for the amorphous semiconductors: Forouhi and Bloomer (FB) parameterization model. A simplified two-layer model consisting of a top layer comprising an aggregate mixture of sp3C+sp2C+void and a bulk layer (L2), defined as a dense amorphized FB-modeled material, was found to simulate the data reasonably well. Through these simulations, it was possible to estimate the dielectric function of our n-C:S material, along with the optical band gap (Eg), film thickness (d), void fraction (fv), and roughness layer (σ) as a function of H2S concentration. The physical interpretation of the five modeling parameters obtained in the amorphous dispersion model applied to the case of n-C:S thin films is discussed. The Raman and ellipsometry results indicate that the average size of nanocrystallites in the sulfur-incorporated carbon thin films becomes smaller with increasing H2S concentration, consistent with atomic force microscopy measurements where the distribution of grain size yielded a gamma around 20 nm. The band gap was found to decrease systematically with increasing H2S concentration, indicating an enhancement of π-bonded carbon (sp2C), in agreement with RS results. These results are compared to those obtained for films grown without sulfur (n-C), in order to study the influence of sulfur addition on film microstructure. These analyses led to a correlation between the film microstructure and its electronic properties.
No takes yet. Share an insight, caveat, or question.
Gupta et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: