Answers are grounded in this paper and cite their sources.
A dielectric-barrier discharge plasma actuator (DBDPA) is a promising flow control device that can prevent flow separation around an airfoil using electrical discharges. Miniaturizing the DBDPA power supply remains a crucial technological challenge because its size and weight determine the performance of fluid devices equipped with this type of actuator. In this study, we propose a compact high-voltage AC power supply for a DBDPA intended for installation on small airplanes, including unmanned aerial vehicles. The power supply, which consists of a power supply board, a main control board, and a DC/AC converter board, is ∼110 g in weight. It can drive a 300-mm long DBDPA without any substantial voltage drop. The power consumption in standby remains below 1 W, and the maximum consumption during discharge in burst mode at a burst ratio of 5% is 24 W. The power supply uses a lithium-ion battery with a capacity of 1800 mA h, which allows continuous DBDPA operation for ∼1.5 h. An experiment was conducted in a wind tunnel using an airfoil model whose cross-section corresponds to that of an airfoil from a commercial glider airplane. Experimental results reveal that the surface pressure around the airfoil is modified by DBDPA operation, clearly demonstrating the effectiveness of the developed power supply for operating a DBDPA as a flow control device. The size and weight of the proposed power supply can be established as a benchmark to further miniaturize and optimize DBDPA power supplies.
No takes yet. Share an insight, caveat, or question.
Suzuki et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: