Answers are grounded in this paper and cite their sources.
We present a detailed experimental procedure for the synthesis of poly( p ‐phenylene vinylene) by the precursor route. Special emphasis is given to the conditions of the thermal elimination reaction that leads from the processable precursor polymer 4 to PPV. We found that a temperature of 320°C is necessary to remove sulphur and chlorine containing defect structures which are probably formed by nucleophilic substitutions during thermal elimination. PPV prepared by our procedure contains 0.12% of chlorine and 0.15% of sulphur. With this material we are able to prepare large area light emitting diodes (LED) which work at driving voltages as low as 2 Volts in an ITO/PPV/Al configuration. The low threshold results in an improved device performance: So a LED continuously driven with a current density of 20 mA/cm 2 emits light for one week at ambient conditions and for more than four weeks if operated in a glove box at room temperature.
No takes yet. Share an insight, caveat, or question.
Gmeiner et al. (1993) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: