Answers are grounded in this paper and cite their sources.
This paper presents the results of a study of the microhardness and corrosion resistance of a number of protective coatings applied to the surface of D16 alloy products. Various protective coatings (chromium, chromium nitrite, and a chromium nitrite layer with a chromium layer deposited on top) are proposed, each with varying degrees of Vickers microhardness (from HV = 80 to HV = 1114) and corrosion resistance. A chromium layer deposited on the surface of D16 alloy is shown to have very low hardness (HV = 80). A chromium nitrite layer deposited on the surface of D16 alloy is determined to have high hardness (HV = 655), but very low corrosion resistance. A double protective coating consisting of a chromium nitrite layer deposited on top of a chromium layer is shown to have satisfactory hardness (HV = 236) and corrosion resistance. It was found that the introduction of a highly hard layer between the surface of a D16 alloy part and an external chromium layer exceeds the surface hardness of the D16 alloy parts several times. It was shown that treating protective chromium-containing coatings with active oxygen species significantly increases the corrosion resistance and hardness of these coatings.
No takes yet. Share an insight, caveat, or question.
Guchenko et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: