This is the authors' abstract. We don't add key points for this paper.
The influence of the negative electrode design on its electrochemical performance with regard to Li insertion/de-insertion is analyzed in this work. A combined experimental/modeling approach is undertaken relying on Newman continuum model. Various designs of industry-grade graphite electrodes (2–6 mAh cm −2 ) were previously characterized by measuring geometric and physical parameters that are used as input parameters in the present model analysis. The half-cell model is successfully validated against rate-capability experiments without any further parameter fitting. The various polarization contributions are then identified based on the model analysis of rate-capability tests on the various electrodes. It emerges that low-loading electrodes suffer from larger particle-scale limitations (mainly solid-diffusion limitation) than high-loading electrodes because of a lower active surface area per geometric area. However, high-loading electrodes undergo large liquid-phase limitations at medium to high current densities: a large overpotential develops because of the formation of a large salt concentration gradient across the cell. Finally, the graphite electrode model is used into a full-cell model vs. LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC) as the positive electrode. Simulations allow for a forecast of the occurrence of Li plating for various cell designs with the constraint of a constant ratio of negative to positive electrode loading.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Malifarge et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: