Answers are grounded in this paper and cite their sources.
First, the pre-mining pressures in the coal burst area of Miike mine are investigated by measuring the strains on the bottom surfaces of. borehole, drilled in the roof, by the stress-relief technique. It is found that the vertical normal stress, equivalent to the weight of overburden, acts on the coal seam and both of the horizontal normal stresses are nearly equal to the half of the vertical normal stress. Secondary, the distribution of the pressure, induced by longwall mining, is examinated by the test drilling method developed in Germany. Analyzing the volume of drillings and the frequency of-rock noise, reached our ears during the test drilling, as shown in Fig. 6, the existence of unusual additional pressure in the coal seam surrounding the mined area is concretely found out, and it is pointed out that this unusual pressure is ascribed to the behavior of the rigid hangingwall consisted of the thick sandstones.The effect of the de-stress drilling is practically studied by examining the relation between the occurrence of coal burst and the record of the drilling. It is found that the hazard of coal burst at the longwall face can be removed by the effective parallel drilling, 100mm diameer, with the constant interval, 8m, of which the drillings is over 600 liters/m during the drilling in the high-pressure zone, 5-20m distant from the rise side entry, and the averaged frequency of the rock noise is caught over 2 times/m as shown in Fig. 7.
No takes yet. Share an insight, caveat, or question.
SUGAWARA et al. (1981) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: